Products
 
COUPLING AND CONNECTORS
DIN EN877 PIPE & FITTING
BS437/416 PIPE & FITTING
ASTM A888/CISPI301 PIPE & FITTING
CASTING IRON MANHOLE COVERS AND FRAME
LOST-FOAM CASTING PARTS
 
  Contact us
Tel:+86-311-68036488
Fax:+86-311-67794622
Add:No18 Fengshou Rd, Chang`an dist, Shijiazhuang Hebei China
E-mail:admin@bsi-metal.com, beisai@126.com
 
DIN EN877 PIPE & FITTING  
DIN EN877 PIPE
DIN19522 /EN877/BS EN877/ISO6594柔性铸铁排水管/DIN19522 /EN877/BS EN877/ISO6594 Cast Iron Drainage Pipes

铸铁管符合DIN19522/EN877/BS EN877/ISO6594标准/Cast Iron Pipe conforming to DIN19522/EN877/BS EN877/ISO6594
材质:灰铸铁/Material:Cast Iron with flake graphite
质量要求:GJL-150 符合 EN1561 /Qualilty:GJL-150 according to EN1561
涂层:SML,KML,BML,TML/Coating: SML,KML,BML,TML
口径:DN40-DN300/Size:DN40-DN300

离心铸造生产的DIN19522/EN877机制柔性灰口铸铁管通过柔性连接应用于下排水及通风系统,其主要有以下优点:

The DIN19522/EN877gray cast iron soil pipes produced by centrifugal technology which are used in drainage sewer system and ventilation ducts system through a flexible linkage. which have following advantages :

---管道平直 重量轻 ---Flat straight, even pipe wall light heavy.

---高强度 高致密性 ---high strength and density

---内外壁光滑无铸造缺陷 ---high smoothness internal and external surface, no casting defect,

---容易安装 维修简单 寿命长 ---Easy installation, easy maintain, long using life,

---环保100%可回收再利用 ---Environmental protecting and 100% recovery

---防火 阻燃 ---Fireproof and fire resistance

---无噪音 ---No noise

SML地上部分排水通风铸铁管线/SML Above ground drain/soil, vent and rainwater pipework

        1= 双组分环氧树脂油漆Two-component epoxy coating

        2= 灰口铸铁 Cast Iron

3= 高级防腐油漆涂层或者环氧涂层 Red anti-corrosive primer or Epoxy resin painting

内涂层:黄色双组份环氧树脂烤漆,平均干膜漆厚度为120微米以上.

Internal painting : Two-component epoxy resin painting, Yellow color RAL 1021,with average dry thickness of 120 microns.

外涂层; 红色高级防腐普通漆,平均干膜漆厚度为60微米以上或者红色环氧漆平均干膜漆厚度为100微米以上.

External painting: Anti-corrosive primer painting, red color RAL 2001, with average dry thickness 60 microns.

or Two-component epoxy resin painting, red color RAL2001,with average dry thickness 100 microns

       1= 双组分环氧树脂油漆Two-component epoxy coating

       2= 灰口铸铁 Cast Iron

3= 高级防腐油漆涂层Black anti-corrosive primer

内涂层:黄色双组份环氧树脂烤漆,平均干膜漆厚度为120微米以上.

Internal painting : Two-component epoxy resin painting, Yellow color RAL 1021,with average dry thickness of 120 microns.

外涂层; 黑色高级防腐普通漆,平均干膜漆厚度为60微米以上.

External painting: Anti-corrosive primer painting, Black color , with average dry thickness 60 microns.

       1= 双组分环氧树脂油漆Two-component epoxy coating

       2= 灰口铸铁 Cast Iron

3= 高级防腐油漆涂层Green anti-corrosive primer

内涂层:黄色双组份环氧树脂烤漆,平均干膜漆厚度为120微米以上.

Internal painting : Two-component epoxy resin painting, Yellow color RAL 1021,with average dry thickness of 120 microns.

外涂层; 绿色高级防腐普通漆,平均干膜漆厚度为60微米以上.

External painting: Anti-corrosive primer painting, Green color , with average dry thickness 60 microns.

KML/MLK 地下用部分排水通风铸铁管线KML/MLK Below ground drain pipework

1= 双组份环氧树脂油漆 Two-component epoxy

2= 灰口铸铁 Cast Iron

3= 金属富锌Metallic zinc

4= 高级防腐涂层Grey anti-corrosive primer

外涂层; 首先喷耐防腐蚀金属富锌130毫克/ m2 然后喷高级防腐漆,平均干膜漆厚度为40微米以上.

Externally – initial flame applied anti-corrosive zinc coating at 130gr/m2, then painted using a grey acrylic primer with an average dry thickness of 40 microns.

内涂层:双组份环氧树脂烤漆,平均干膜漆厚度为250微米以上

Internally –Two-component epoxy coating, Yellow color, with an average thickness of 250 microns.

TML排水通风铸铁管线/TML drain/soil, vent and rainwater pipework

1= 双组份环氧树脂油漆 Two-component epoxy

2= 灰口铸铁 Cast Iron

3= 金属富锌Metallic zinc

4= 高级防腐涂层Reddish-brown epoxy

外涂层; 首先喷耐防腐蚀金属富锌130毫克/ m2 然后喷环氧漆,平均干膜漆厚度为60微米以上.

Externally – initial flame applied anti-corrosive zinc coating at 130gr/m2, then painted using reddish brown epoxy with an average dry thickness of 60 microns.

内涂层:双组份环氧树脂烤漆,平均干膜漆厚度为150-200微米以上

Internally –Two-component epoxy coating, Yellow color, with an average thickness of 150-200 microns.

环氧静电喷涂铸铁管 / Epoxy Powder Coating  Cast Iron Drainage Pipes

内壁油漆:双组份环氧静电喷涂,平均干膜漆厚度为100-400微米.

Internal Coating : Two-component epoxy resin powder coating, with an average dry thickness of 100-400 microns.

外壁油漆; 双组份环氧静电喷涂,平均干膜漆厚度为100-400微米.

External Coating: Two-component epoxy resin powder coating, with an average dry thickness of 100-400 microns.

 
COPYRIGHT:BEISAI